Microsoft VPN. This worked ok, once the pix was removed. Apparently there were some
port issues from or to the client. Connected the dsl directly into Server's NIC and it worked
fine. There's no need to setup a Radius server for VPN. All that is required is Active directory permission (dial-in attribute) and RRAS installed. You can connect to the vpn from the outside
and it will obtain an IP in the LAN ip range, so that u can browse, ping lan nics etc..
If using PIX it is required to allow port forward PPTP tcp 1723 and GRE (ip 47)
6.2 version PIX
For the 6.3 version, use fixup protocol pptp
No comments:
Post a Comment